Standard DirecPC Installation

 �The charges herein vary depending upon the nature of the site and the height of the building. � Residential locations are free standing or multiple dwelling unit structures of one to two stories. � In these cases, up to 100ft of cable is included in the Installation charge . � Commercial locations are places of business and MDU's (residential, commercial or industrial) greater than two stories. In these cases, up to 150ft of cable is included in the Installation charge.  �The charges set forth assume that the location to be serviced by us be it residential and no higher than 1 stories. � To obtain the correct charge for a building greater than 1 story or commercial, contact us.

 You are responsible for all travel costs except installations in the 48 contiguous States. �

 �The following steps will be taken for each of the specified types of installation:

A. � � Mount antenna on exterior surface and ground per electrical code
B. � � �  Run up to100ft standard RG-6 cable (provided) to one receiver/computer location
C. � � Run cable through standard frame structure or single layer of masonry
D. � � Peak Antenna on correct satellite.
E. � � Connect cable to USB modem/s or PCI card
F. � � Verify reception of satellite signal and demonstrate proper functioning of component(s)
 � � (if USB modem and software is installed, operating and available)